This page is DRAFT ONLY - these commands are yet to be confirmed!
Vote to change map Bring down your console and type in "mlchangecurmap mapnamegamemode endrule endvar"
where mapname is the name of the map,
gamemode is the name of the game mode,
endrule is either points or time,
and endvar is the value of the endrule.
So to change the map to Cambodia CTF with a time limit of 40 mintues, you would type in:
mlchangecurmap cambodiactf time 40
Vote to restart Simply bring down the console and type in 'restartmap'.
Console commands for administrators and remote administrators, v1.60
set srvctf respawn_time_seconds sets the respawn time limit for the CTF mode
set srvtt mission_time_minutes respawn_time_seconds sets the mission and respawn times for the TT mode
set srvvoicechat [status] switches the voice chat support off/on on the server; status can be set as 0 (off), 1 (low quality), 2 (high quality)
it is recommended to use the low quality on good internet servers and high quality for LAN games only
set srvjoinmsg "Message from the server" Enables the administrator to set a message that is sent to all players who join the server
Console commands, v1.27
set srvteamlock lock lock setting:
0 - no lock
1 - US team locked
2 - VC team locked
when the team is locked, no one can join it
set srvvmchat 0/1 default 0, 1 disables messages about killing somebody and commands texts, only chat and system messages are displayed
set srvbluebt 0/1 default 1, 0 disables the blue highlight of all booby-traps
Console commands, v1.20 For everybody:
kick player_name kick player_id player_name - Name of the player to be kicked.
player_id - Outputs the ID number of the player. This can be found by using the "list" command.
administrators kick the player immediately, clients will start voting
startadmin password password = password for remote administration
send password on server to enable remote administration for the client
list the list of all players is printed to the console
listadmins list of all administrators is printed to the console
mpresult outputs the current game results into a text file
mllist outputs the current "missions list" to the console
mlchangecurmap mission endrule endruleval example: mlchangecurmap StreamCTF time 20 changes the current mission in the mission list when no administrator uses it, a voting is started
restartmap restarts the current mission
when no administrator uses it, a voting is started
chattoconsole 0/1/2 default is 0 for server and 1 for client
0 - nothing is written to the console 1 - The players' chat is written to the console 2 - The players' chat and information about killing is written to the console
consoletime 0/1 when on (1) adds system time as a prefix to important messages written to the console
For the spectator:
rpstart filename starts saving a game replay, the result is saved as a "replayfilename.rep" file
rpend ends the saving of the game replay
rpload filename loads a saved relay, the game disconnects from the current game and goes to the "replay mode"
In replay mode:
rpsetbmp fps filename example: rpsetbmp 25 StreamBattle
sets the FPS for BMP saving and the name of the files
For administrators and remote administrators:
ban player_name hours ban player_id hours example: ban CheatingPlayer 10
example: ban 268 0
player_name - Name of the player to be banned
player_id - Outputs the ID number of the player, this can be found by using the "list" command
hours - Number of hours, 0 means for ever
player is kick out from the game and cannot join the server for selected number of hours
banip player_name time banip player_id time bans a player from the game as standard "ban" command, but remembers the player's IP address and disables anybody to connect from this IP
banlist outputs a list of all banned players to the console
banremove index removes the banned player from the list
clearban clears the list of banned players
set srvvm status status - 0 or 1.
sets Vietnam mode on/off set srvab status
status - 0 or 1. sets "autobalance" on/off
set srvff status status - 0 or 1; sets Friendly fire on/off
set srvec status status - 0 or 1.
sets Enemy camera on/off
set srvcleng limit limit - Maximum number of player of this class.
sets limit for the engineer class
set srvclmed limit limit - Maximum number of player of this class
sets limit for the medic class
set srvclsni limit limit - Maximum number of player of this class
sets limit for the sniper class
set srvclrad limit limit - Maximum number of player of this class
sets limit for the radioman class
set srvclmac limit limit - Maximum number of player of this class
sets limit for the machinegunner class
set srvakidle minutes minutes - Number of minutes or 0 to disable
sets time for "auto kick idle player"
set srvakping ms ms - Number of milliseconds or 0 to disable
sets ping for "auto kick high ping"
set srvaktk tk_value ban_hours tk_value - Number of all kills, 0 to disable
ban_hours - Number of hours to be banned when kicked by the auto kick
sets "auto kick team kill"
set srvpassword new_password changes the current server password
mlclear clears all missions in the mission list except the actual one
mlchangemap index mission endrule endruleval example: mlchangemap 0 StreamATG points 4
changes the missions in mission list (can be used for the actual mission too - mission is reloaded immediately)
mlchangeendrule index endrule endruleval example: mlchangeendrule 0 frags 20
mlchangeendrule 0 time 40.
mlchangeendrule 0 points 5.
changes the end rule (can be used for the actual mission too)
mlremovemap index removes mission from the list (cannot be used on actual mission)
mladdmap mission endrule endruleval example: mladdmap NvaCoop time 60
adds a mission to the list
nextmap switches to the next mission in the list
nextmap map_index switches to a specified map in the mission list
adminsay "something to say" example: adminsay " Hello, I am your ruler! "
special chat for the administrator - so everybody can see that it is an administrator (the message has a different colour and stays for a longer amount of time)
set srvdb 0/1 sets the "BlackDeath" option on or off - after the player is killed his screen fades to black (required for clan wars)
swapplayer name/id swaps a player to the other team (valid for team based games)
set srvspectators limit delay set the spectators properties
limit - Maximum number of spectators
delay - Delay in seconds
set votechangemap 0/1 (default value is 1) enables or disables the voting about the current map/mode change
set voterestart 0/1 (default value is 1) enables or disables the voting about the current map restart
For administrators only:
set srvadmin password password = new password sets password for the remote administration
set srvadmin clears password for the remote administration, no remote administration is allowed
Console commands, v1.01 For all players:
Kick (player-name) to kick vote
listmap shows server map list
votemap X starts a map vote
showfps 1 shows FPS + co-ordinates
name "your nick" to changes your nick
kill to kill your self
reconnect to reconnect to the server
quit to quit the game
For administrators only:
startadmin "password" start remote administration
listadmins (shows a list of all administrators)
list (shows a list of players and ID)
set SRVAKPING "auto kick" "high ping" (set to 0 to disable)
set SRVTKAK "auto kick" "team kill" (Set SRVTKAK 5 1) (5 team kills, ban for 1 hour)
kick "player name" (kicks a player)
ban "player name" "X" (bans for X specified number of hours)
ban CheatingPlayer "99" (bans CheatingPlayer for 99 hours)
set SRVADMIN (sets admin password)
set SRVVM (turns "Vietnam mode" on/off) (0/1)
set SRVAB (turns "autobalance" on/off) (0/1)
set SRFF (turns "Friendly Fire" on/off) (0/1)
set SRVEC (turns "Enemy Camera" on/off) (0/1)
set SRVCLENG (limit the number of Engineers)
set SRVCLMED (limit the number of Medics)
set SRVCLSNI (limit the number of Snipers)
set SRVCLRAD (limit the number of Radiomen)
set SRVCLMAC (limit the number of Machingunners)
set SRVAKIDLE (number of minutes before an idle player is auto kicked ) (0 to disable)
